The exclusive Scratch Away glass polishing disk Ø50mm removes scratches from all types of glass in one operation.

Polishing efficiently and effectively

As glass is a very hard material the diameter of a polishing disc determines the pressure which is required to reach the correct pressure per cm² by the user. The bigger the disk the more pressure a worker needs to apply when polishing a scratch. With our Scratch AWay glass polishing disk of Ø50mm a minimum pressure is needed during polishing in horizontal and in vertical position (when the window is installed). This ideal size, low number of RPM and non-spattering makes polishing efficiently and effectively and decreases the possibility of adding more damages to the glass which is delaying your delivery.

No spattering

The polishing foam which starts to come out of the disk while achieving the correct temperature of 65°C/149°F sticks at the polishing area and does not spatter like ordinary polishing pasta’s do. This makes Scratch Away unique and very suitable also inside cars, trucks, busses and trains. The Scratch Away glass polishing disc Ø50mm can remove approximately 23 scratches of 50 mm long. The preferred speed of the machine for polishing glass is 3,8 almost 4. But the final speed of the disk on the glass should approximately 65 RPM in order to create a temperature of 65°C/149°F. You can achieve this by applying about 2.5 to 3 kilo of pressure on the top of the machine and spraying a small amount of water.